AM-31 Massage Bed

AM-31 is a massage bed with the storage built into the base: 2000 × 1000 mm, cushion at 620 mm, on a cherry-toned timber frame. One long side is a two-door cabinet with ring pulls, the other is an open shelf, and the top is a flat upholstered pad rather than a platform that moves.

Footprint and station planning

At 1000 mm wide it sits between the 800 mm single beds and the 1200 mm platforms: wide enough that a client can turn over without feeling the edge, narrow enough to leave a working aisle. At 620 mm the top is at the tall end of the range, so check the stool against the bed rather than the room. The cabinet opens along one side, which is the side that needs clear floor to stand in; the open shelf at the other end is reached from the working position and is where the towel stack usually ends up. The base is a solid volume, so nothing slides underneath — everything stored has a home.

Where this massage bed is used

Specified for treatment rooms that have to carry their own linen, oils and towels without a trolley, and for rooms built in warm timber where a black or painted base would fight the joinery. The flat top suits bodywork that runs the length of the bed; where the client needs to sit up through a consultation, the AM-31D massage bed puts the same cabinet under a top that lifts on a motor, 100 mm wider and 20 mm lower. Where a higher timber deck is wanted without the built-in storage, the AM-27 runs 630 mm on a slatted frame. Where the same cabinet should come in black and the top should carry a face cut-out, the AM-31D-9 is that build at the same 1000 mm width. With woven cane doors instead of solid panels, the AM-31D-Shuitian runs 850 mm at the same 620 mm top. Where the same cupboard-and-shelf layout should run in dark-stained timber at 2100 x 1200 mm, the AM-70 is that bed.

Customization and finishes

The stain on the timber and the upholstery colour are chosen per order against a colour reference, and the two are specified together because the contrast carries the design. The cabinet doors, the shelf depth and the frame section are fixed once cut, so length and width are agreed before production rather than adjusted afterwards. Send a colour reference with the target dimensions and the reply confirms what is buildable plus the MOQ for that specification.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract, not published as fixed terms. The cabinet makes this bed heavier and bulkier than an open-frame table, so tell us the destination port and whether the room is upstairs or served by a lift, and the quotation covers packing to suit. Where the top should carry a face cut-out and two arm openings rather than a cabinet, the AM-58 runs the same 2000 x 1000 mm on a steel frame. The rest of the range is listed with dimensions in the spa massage bed collection, and how the builds differ is set out in our commercial massage bed buying guide.