AM-70 Massage Bed

AM-70 is a 2100 x 1200 mm massage bed at 620 mm, built as a dark-stained timber frame with a grey mattress on top. The base carries storage on both sides — open shelf to one end, a two-door cupboard to the other — and a brass key-pattern inlay runs along the bottom rail.

Footprint and station planning

At 2100 mm this bed is 100 mm longer than the 2000 mm builds in the range, which matters twice: a room that fits two 2000 mm beds against a wall may not fit two of these, and fitted covers bought for a 2000 mm bed will not reach both ends. The 1200 mm width allows a therapist to work one shoulder from either side without reaching across. At 620 mm it is the tall group, so a client needs a step to get up and a therapist on a standard stool works level. The base is solid to the floor and the storage is built in, so plan the cupboard door swing and leave the open shelf side accessible.

Where this massage bed is used

Written for rooms that need the storage inside the furniture rather than in a trolley beside it: towels and oils live in the cupboard behind two doors, and the open shelf takes what has to be seen and reached in a hurry — a stack of clean covers, a bottle that is being used. The brass inlay is on the bottom rail, which is exactly the part that takes shoes and the vacuum head, so a decorative band there earns its keep by covering the scuffs. Where the same layout should come in cherry at 2000 x 1000 mm, the AM-31 is that bed; where the room wants a flat platform with no storage and a light strip under the edge, the AM-67 is that build. Where the same 2100 mm length should carry a flat top with a padded hand rest at the head end instead of storage, the AM-75-2 is that bed at 880 wide. Where the same 1200 mm width should run without storage and with a lit, recessed plinth under a cream pad, the AM-810 is that bed. Where the room can take a longer bed, the AM-833 takes the same build out to 2400 mm at 650 mm on a sculpted shell.

Customization and finishes

Cover colour, timber stain and the inlay finish are chosen per order against a colour reference. The cupboard and the shelf are set by the carcass, so their positions cannot be swapped afterwards — say at order stage which end the cupboard should be on. Send a colour reference and the target dimensions and the reply confirms what is buildable plus the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract. At 2100 mm the bed is an oversized piece: give us the door width and the lift access on site as well as the port. The range is listed in the massage bed collection, and how the builds differ is set out in our commercial massage bed buying guide.