AM-27 Massage Bed

AM-27 is a massage bed on a chunky dark-stained timber frame: 2000 × 800 mm, with the leather top at 630 mm. A slatted shelf runs between the legs just above the floor, and the top is a single brown leather slab with a welted edge rather than a divided cushion. The frame is built square, with the legs standing inside the edge of the top.

Footprint and station planning

630 mm is the height that decides who can work at this bed: it sits 10 mm above the AM-41 and 130 mm above the AM-25, which is the difference between a therapist standing comfortably at the bed and one who has to stoop. Measure it against the way the room actually works, not against the client’s height. At 800 mm it is a single-width bed, so two of them side by side take 1600 mm plus the gap, and the legs inside the edge leave a toe recess along both long sides.

Where this massage bed is used

Specified for rooms built in dark timber and warm light, where the bed should look like part of the joinery: treatment rooms with walnut or teak screens, hotel spa suites, and residential wellness rooms. It carries the same frame language as the AM-08 massage bed but in a higher build with a leather top and no face cut-out, so the surface stays flat for bodywork that moves along the whole bed. Where the room is set up for two clients at once, the AM-25 runs 1200 or 1300 mm on the same 2000 mm length. Where the same 800 mm footprint is wanted as an upholstered box on four legs rather than a timber frame, the AM-837-2 is that bed at 620 mm.

Customization and finishes

The leather colour and the stain on the timber are chosen per order against a colour reference, and they are specified together because the contrast between them carries the design. The frame section, the slat spacing and the height are fixed by the build, so length and width are agreed before production rather than adjusted afterwards. Send a colour reference with the target dimensions and the reply confirms what is buildable plus the MOQ for that specification.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract, not published as fixed terms. The frame ships knocked down or assembled depending on the container plan, so tell us the destination port and whether the room is upstairs and the quotation covers packing to suit. Rooms that need both a face cut-out and a lower second working height take the AM-45, which runs 630 mm and 480 mm off one frame. The rest of the range is listed with dimensions in the spa massage bed collection, and how the builds differ is set out in our commercial massage bed buying guide.