AM-75-9 Massage Bed

AM-75-9 is a 2100 x 880 mm massage bed at 650 mm, in ivory leather-look fabric over a plinth base to the floor. The head end has a face cut-out and two separate square arm pads; the main top is one continuous mattress, and a matching stool comes with it.

Footprint and station planning

2100 mm is 100 mm longer than standard: covers made for 2000 mm stop short at both ends, and two along one wall take 200 mm more, usually the walkway. The head section projects past the 880 mm body, so measure to its outer edge beside a wall or trolley. At 650 mm the table is one of the tallest we build: a therapist works without stooping, and a client needs a step up. The head end needs clear floor behind it for shoulder work, so it cannot go hard against a wall. Plinth runs to the floor, so nothing stores under it.

Where this massage bed is used

For rooms where prone work is a normal part of the appointment. The face cut-out lets a client lie face down with the neck straight instead of turned to one side, and the two separate pads give the arms somewhere to rest rather than tucking under the chest — the same problem the AM-58 solves with arm holes in the mattress. With the pads in place, the 2100 mm top is one flat surface for supine work, with no hinge to reset. Ivory keeps a warm-lit room from reading as clinical and wipes down, though a pale cover shows product marks sooner than a dark one. Where the same footprint should carry no cut-out and a side hand rest instead, the AM-75-2 is that bed; where no face opening is needed at all, the AM-27 runs a flat leather top at 800 mm. Where a 900 mm body is wanted with a lit woven skirt and a stool rather than a stone side panel, the AM-828 is that bed at 600 mm. Where the opening has to leave the top unbroken, the AM-838 puts it in an outboard head rest at 2100 x 880 mm.

Customization and finishes

Cover colour, head section cover and side panel tone are chosen per order against a colour reference. The curved seam is cut with the cover, so a colour change moves the whole line, and the head section is built into the frame, so its side is settled at order. Send a colour reference and the target dimensions and the reply confirms what is buildable plus the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract. Bed and stool pack as two pieces: give us the door width, the lift dimensions and the stair turn. The range is listed in the massage bed collection, and how the builds differ is set out in our commercial massage bed buying guide.