AM-838

AM-838 Massage Bed

2100 x 880 mm massage bed at 630 mm with a flat top and an outboard head rest carrying the face opening.

Dimensions2100 x 880 x 630 mm
Functions / FeaturesOne continuous padded top with a rounded head end and no opening; outboard head rest carrying the face opening; lower open shelf under the head rest with a round recess; sculpted shell base split by a sweeping seam on each flank; upholstered stool; 630 mm bed height
Request a Quote

AM-838 is a 2100 x 880 mm massage bed at 630 mm, upholstered in cream leather-look. The top is one continuous pad with a rounded head end and no opening cut into it. The face opening sits instead in an outboard head rest that cantilevers off the head end, with a second, lower shelf beneath it carrying a round recess. The base is a sculpted shell split along each flank by a sweeping curve.

Footprint and station planning

2100 mm is 100 mm longer than the 2000 mm beds, and the head rest projects beyond that, so plan the head end on the rest and leave standing room behind it. 880 mm is 80 mm wider than the 800 mm beds: still one therapist’s reach, but the far walkway has to allow for it. At 630 mm the therapist stands or works from a stool. The shelf under the head rest is open, so a client can put a foot up or the therapist can set a bowl down, and the base reaches the floor with no gap to sweep.

Where this massage bed is used

For rooms that need a flat surface most of the day and a face opening some of it. Because the opening is outboard, the top itself is unbroken: a client can lie face-up or on either side, and the bed works as a plain couch between treatments. That is the difference from the AM-75-9, where the cut-out is in the top itself, and from the AM-75-2, which has no opening at all. Cream leather-look wipes clean, and the sculpted shell hides scuffs at the foot end where they collect. Where the opening has to disappear completely, the AM-837-2 lifts its pad out.

Customization and finishes

Cover colour, the tone of the sculpted seam and the finish of the stool are chosen per order against a colour reference. The head rest is built into the frame, so tell us which end the client lies with their head and whether the shelf below needs to take a foot or a bowl. The rest can be left off if the bed has to sit tight to a wall. Send a colour reference and target dimensions; the reply confirms what is buildable and the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract. The bed ships as a top, a base and the head rest: give us the door width, lift dimensions and stair turn. The range is listed in the massage bed collection, and our commercial massage bed buying guide sets out how the flat-top, cut-out and cabinet builds differ.