AM-810 Floating Massage Bed

AM-810 is a 2000 x 1200 mm floating massage bed at 550 mm, in cream fabric with a face cut-out at the head end. The mattress is one thick pad with an overhanging edge and no hinge, and the walnut-veneer plinth is set back from it on every side. A concealed LED strip around the base makes the plinth appear to hover.

Footprint and station planning

2000 x 1200 mm is the full-width footprint, and the mattress overhangs the plinth by a hand’s width, so measure the walkway to the upholstered edge, not the wood. The overhang leaves the floor under it open, so a mop has to go round the base. At 550 mm a client sits on the edge and swings up, and a therapist works from a stool or standing. The face cut-out sits at the head end, which needs standing room behind it. The LED strip needs a power point in the base; plan the feed before the floor is laid.

Where this massage bed is used

For rooms that want the bed to read as a low platform rather than a box. The cream pad against the dark walnut is the whole design: the top looks like one slab, and the light under the plinth lifts it off the floor in a dark or warmly lit room. With no backrest or hinge there is nothing to reset or work loose, and the face cut-out lets a client lie prone with the neck straight. Cream shows marks sooner than a mid tone, so it suits a room where the cover is wiped daily. Where 1200 mm must carry storage, the AM-70 runs 2100 mm with a cupboard; the AM-56 keeps 2000 x 1200 at 550 mm with a louvred cabinet; the AM-38 adds an electric backrest at 500 mm. Where the same floating plinth is wanted as a wider bed with a raised backrest rather than a massage table, the AM-821 runs 2000 x 1500 mm at 530 mm.

Customization and finishes

Cover colour and the wood tone of the plinth are chosen per order against a colour reference; the face-cut-out ring is matched to the cover. The mattress is built as one pad, so its thickness is settled at order, and the LED strip is set into the base, so the feed side is decided at build. Send a colour reference and target dimensions; the reply confirms what is buildable plus the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract. The bed ships as one piece: give us the door width, lift dimensions and stair turn, and mark the base-light power point. The range is listed in the massage bed collection, and our commercial massage bed buying guide sets out how the flat-top, cut-out and cabinet builds differ.