AM-64
AM-64 Massage Bed
1900 x 800 mm massage bed at 620 mm in navy fabric on a steel frame, with electric backrest and face cut-out.
AM-64 is a 1900 x 800 mm massage bed at 620 mm, upholstered in navy fabric as one continuous top with a padded face cut-out at the head end. The base is an open black steel frame, and the backrest section is driven by an electric actuator.
Footprint and station planning
620 mm is the tall group: a therapist works level with the table, and a client needs a step up. At 1900 mm the bed is 100 mm shorter than the 2000 mm builds, which decides whether a room takes two beds or one plus a trolley. At 800 mm it is the narrow single, so two fit along one wall with a walkway between. The open frame leaves the floor visible and sweepable underneath — nothing hides there, so towel storage belongs to the room. The actuator sits under the head end, so plan the outlet on the side the therapist does not stand and keep the cable out of the walkway.
Where this massage bed is used
Written for rooms where a client turns over mid-session: the top is one continuous piece, so there is no seam at the shoulder when the client rolls, and the cut-out carries a padded ring so the forehead is not resting on a towel. The electric backrest matters where the routine starts seated: the client sits up to talk, lies back for the work, and nobody cranks a ratchet in between. Steel suits rooms that get hosed down, where a timber base swells and marks. Where the same 1900 x 800 footprint should come on a timber frame with a swing-arm cradle, the AM-37 is that bed; where the same electric backrest should sit on a lower 450 mm platform, the AM-36 is the low version.
Customization and finishes
Upholstery colour, frame finish and the width of the padded ring are chosen per order against a colour reference. The actuator side is fixed with the frame, so a change of hand must be stated with the order, and the frame takes either a matt or a satin black. Send a colour reference and the target dimensions and the reply confirms what is buildable plus the MOQ.
Ordering, MOQ and lead time
MOQ, packing, lead time and warranty are settled per order and written into the contract. The frame ships knocked down and assembles on site; give us the door width as well as the port. Tell us the destination country so the actuator is supplied for the right voltage and plug. The range is listed in the massage bed collection, and how the builds differ is set out in our commercial massage bed buying guide.