AM-37 Massage Bed

AM-37 is a solid-wood massage bed with an upholstered top, an open slatted shelf and a face cradle carried on a swing arm: 1900 × 800 mm with the top at 620 mm. The timber frame stays visible at the sides rather than being fully upholstered, which is the version specified where the bed stands beside timber cabinetry or panelling.

Footprint and station planning

At 1900 mm it is 100 mm shorter than the 2000 mm bodies, which is the kind of difference that decides whether a room takes two beds or one plus a trolley. At 620 mm the top sits at the tall end of the range, so check the stool against the bed rather than against the room. The cradle swings out on its arm at the head end, so that end needs clearance when it is extended; folded away, it sits inside the footprint and the top is a plain pad again. The slatted shelf adds no depth of its own, but it has to stay reachable from the working side.

Where this massage bed is used

Specified for commercial spa treatment rooms where the timber frame remains part of the interior, and for rooms that store linen and oils within reach rather than on a trolley. The swing arm is what earns its place in daily use: the pad moves out of the way when the client turns onto their back, so the surface stays flat and nobody has a hole under their shoulders. Where the storage should be closed rather than slatted, the AM-31D massage bed carries a two-door cabinet. Rooms that combine bodywork with foot care are planned around the spa treatment bed with basin. Where the same 1900 x 800 footprint should come on an open steel frame with a built-in face cut-out and an electric backrest, the AM-64 is that bed.

Customization and finishes

Timber finish, upholstery colour and the covering on the cradle pads are chosen per order, so the frame can be matched to the cabinetry it stands beside. The frame section and the slat spacing are fixed once cut, so length and width are agreed before production rather than adjusted afterwards. Send a colour reference with the target dimensions and the reply confirms what is buildable plus the MOQ for that specification.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract, not published as fixed terms. The cradle arm is a separate metal assembly, so tell us the destination port and the station count and the quotation covers packing for both parts. Other builds, including the cabinet-base version, are listed with dimensions in our spa massage bed range, and how they differ is set out in the commercial massage bed buying guide.