AM-29 Massage Bed

AM-29 is a low platform bed: 2000 × 1200 mm with the top at 480 mm, upholstered in brown leather as a single volume. A stepped section runs at one end, and an oval face cut-out is set into the surface rather than raised above it. It reads as a daybed from across the room and as a treatment bed once someone is lying on it, which is the point of the design.

Footprint and station planning

480 mm is the lowest top we build — 20 mm under the AM-25 and 150 mm under the AM-27 — so this is the one that suits a floor-level room, and the one that puts a seated therapist closest to the work. It is also the wrong bed for anyone working standing, because there is no height left to work down to. At 1200 mm wide the body takes two people sitting in conversation, but for treatment it is one client and the extra width is what lets a therapist work from either side without reaching across.

Where this massage bed is used

Specified for relaxation rooms and hotel suites where the bed is seen more than it is used, and for treatment rooms that already work at floor level. The platform edge is upholstered on all four sides, so it can stand in the middle of a room rather than against a wall. Where the working surface has to be higher, the AM-27 runs 630 mm on a timber frame. Where the same 1200 mm width should carry a mattress with a lattice edge instead of a plain leather top, the AM-25 is the upholstered build. Where a client should be able to sit up without being lifted, the AM-36 massage bed puts an electric backrest on the same 1200 mm platform at 450 mm.

Customization and finishes

Leather colour and the stitching line are chosen per order against a colour reference, and the stepped section is upholstered in the same material unless a contrast is asked for. The volume, the position of the cut-out and the step are fixed by the frame, so length and width are agreed before the frame is built rather than adjusted afterwards. Send a colour reference with the target dimensions and the reply confirms what is buildable plus the MOQ for that specification.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract, not published as fixed terms. A 1200 mm body packs as an oversized piece, so tell us the destination port and the door width on site and the quotation covers packing to suit. The rest of the range is listed with dimensions in the spa massage bed collection, and how the builds differ is set out in our commercial massage bed buying guide.