AM-08 Massage Bed

AM-08 is a massage bed on a solid timber frame, stained dark and left exposed: 2000 × 800 mm with the cushioned top at 620 mm. A slatted shelf runs between the legs just above floor level, and two small brackets sit out from the frame at the head end. The top is a single upholstered slab with a face cut-out and a plain edge, so the line between cushion and timber stays clean.

Footprint and station planning

At 2000 × 800 mm it takes the single-width footprint, and at 620 mm the top sits higher than the low beds, so check the stool against the bed rather than against the room. The slatted shelf is open on all four sides, which is what makes it usable: towels and oils sit under the bed within reach of either working position, and nothing is boxed in where it cannot be seen. The legs stand inside the edge of the top, leaving a toe recess along both long sides, and the brackets at the head end sit clear of the mattress so a cup is not knocked onto the sheets.

Where this massage bed is used

Specified where the timber is meant to carry the room rather than the upholstery: treatment rooms with wood floors, timber screens or a warm palette, and hotel suites where the bed is part of the fit-out rather than equipment dropped into it. The open shelf suits rooms that work out of a basket rather than a trolley. Where the same footprint should read as upholstered instead, the AM-41 massage bed runs 2000 × 800 mm on a two-tier platform. Where storage has to be closed and dust-free, the AM-31D massage bed carries a two-door cabinet and an open shelf. Where the frame should disappear into a pale room, the AM-08-Upgraded is the same bed in a white painted finish. Where the deck should sit 10 mm higher and the top should be leather rather than fabric, the AM-27 massage bed runs the same 2000 × 800 mm frame at 630 mm. Where the same 620 mm should be a flat platform with no backrest and a light strip under the edge, the AM-67 is that bed. Where the same 800 mm timber frame is wanted with an adjustable height, the AM-826 runs 1960 mm from 630 to 680 mm.

Customization and finishes

Upholstery colour and the stain on the timber are chosen per order against a colour reference, and the two are specified together because the contrast between them is the design. The frame section, the shelf spacing and the bracket positions are fixed once cut, so length and width are agreed before production rather than adjusted afterwards. Send a colour reference with the target dimensions and the reply confirms what is buildable plus the MOQ for that specification.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract, not published as fixed terms. The frame ships knocked down or assembled depending on the container plan, so tell us the destination port and whether the room is upstairs and the quotation covers packing to suit. The rest of the range is listed with dimensions in the spa massage bed collection, and how the builds differ is set out in our commercial massage bed buying guide.