AM-829 Massage Bed

AM-829 is a 2000 x 800 mm massage bed at 650 mm, with a cream leather-look top over a light timber frame. The top is one pad with a shaped waist at mid-length, one section wider than the other, and no face cut-out. Vertical timber battens form both flanks above large arched openings, and a slatted shelf runs the base. A shallow pull-out panel sits on one flank and a rounded shelf projects from one end. The candles and throw are staging.

Footprint and station planning

2000 x 800 mm is the standard footprint: a pair takes 1600 mm plus a gap, and one needs 2000 mm of wall. The projecting shelf adds to that footprint, so measure to its outer edge. 650 mm suits standing work, so check stool height for seated treatments. The slatted shelf keeps towels off the floor, and the arched openings let a mop under the frame. There is no power or plumbing to plan for.

Where this massage bed is used

For face-up and side-lying work. With no face cut-out, a prone treatment needs a separate face rest, but the top turns over without a plug or ring to reset. The waist brings the therapist closer to the shoulders without leaning across a full-width pad. Vertical battens and arched openings keep a deep frame from reading as a box. Cream leather-look wipes down, though it shows oil sooner than a mid tone. Where a shaped waist comes with a face cut-out and a 680 mm body, the AM-11 is that bed; the AM-08 runs a straight 2000 x 800 mm top on a dark timber frame. The AM-826 keeps the timber frame at 1960 mm with a 630-680 mm adjustable height, and the AM-56 is the short slatted build.

Customization and finishes

Cover colour, timber tone and the waist profile are chosen per order. The waist is cut into the pad, so its depth and position are settled at build. The pull-out panel and the projecting shelf are each fitted on one side, so say which side the therapist works from. Batten and slat spacing are fixed once the frame is cut. Send a colour reference; the reply confirms what is buildable and the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order in the contract. The bed travels as a pad on a separate frame: give us door width, lift dimensions and stair turn. Widths and heights are in the massage bed collection, and our buying guide sets out how flat-top, cut-out and cabinet builds differ.