AM-11 Back Scrub Massage Bed

AM-11 is a 2000 x 680 mm massage bed built for back scrubs, at 650 mm, in grey leather-look on a light timber frame. The top is one thick pad with an oval face cut-out and a shallow waist cut into both sides at mid-length. Four square legs carry a slatted shelf, and a small half-round padded rest is fixed to one front leg. No basin, backrest or control panel.

Footprint and station planning

680 mm is narrower than the 800 mm bodies used by most full-length beds, so a pair takes 1360 mm plus a gap and a narrow room keeps a walkway on both sides. Measure at the ends, not the waist: the sides dip inward but the frame stays full width. 650 mm suits standing work, so check stool height for seated treatments. The slatted shelf takes folded towels off the floor, and the open slats let damp linen air.

Where this massage bed is used

For back scrubs, exfoliation and other prone treatments where the therapist works along both sides. The waist is the reason to choose this top over a rectangle: the therapist reaches the spine without leaning across a full-width pad. The face cut-out keeps the neck straight, and grey leather-look wipes down after oil or scrub. With no basin or plumbing, rinsing happens at the shower, not the bed. Where a straight 2000 x 800 mm top is wanted on a dark timber frame, the AM-08 is that bed; the AM-826 keeps the timber frame at 1960 mm with an adjustable 630-680 mm height. For a cut-out with two arm holes, the AM-58 runs 1000 x 620 mm.

Customization and finishes

Cover colour, the timber tone and the face cut-out size are chosen per order against a colour reference. The waist is cut into the pad, so its depth and position are settled at build. The half-round rest is fitted to one front leg, so say which side it goes on and whether you want one. Slat spacing is fixed once the frame is cut. Send a colour reference; the reply confirms what is buildable and the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order in the contract. The bed travels as a pad on a separate timber frame: give us door width, lift dimensions and stair turn. There is no power or plumbing to plan for. Widths and heights are listed in the massage bed collection, and our buying guide sets out how flat-top, cut-out and cabinet builds differ. The AM-837-2 uses a lift-out head pad instead of a fixed cut-out where the room needs a flat top.