AM-837

AM-837 Massage Bed

2000 x 800 mm massage bed at 620 mm, in sage velvet over a sand base, with an oval face cut-out.

Dimensions2000 x 800 x 620 mm
Functions / FeaturesTwo-tone build, sage velvet top over a sand upholstered base; thick padded top with a raised edge; oval face cut-out at the head end with a raised fabric collar; four padded legs with black glides; two-tone stool; 620 mm bed height
Request a Quote

AM-837 is a 2000 x 800 mm massage bed at 620 mm, built in two colours: a sage-green velvet top over a sand upholstered base. The top is one thick pad with a raised edge, and the oval face cut-out at the head end is ringed by a raised collar in the same fabric. Four padded legs carry the base, each finishing on a black glide, and a two-tone stool comes with it.

Footprint and station planning

2000 x 800 mm at 620 mm is the same footprint as the AM-08 and the AM-837-2, so any of the three drops into the same bay: 2000 mm of wall, a stool beside it, and 800 mm of depth to walk past. The legs lift the base clear of the floor, so a mop passes underneath and a folded towel can go under the edge. The cut-out faces the head end, which needs standing room behind it rather than a wall. Nothing stores in the base.

Where this massage bed is used

For rooms that want colour on the equipment. Two tones do the work a single fabric cannot: the sage top reads as the working surface and the sand base disappears against a warm floor, which keeps a small room from looking filled. Velvet holds light better than leather-look but marks more easily, so it suits a room where the cover is brushed between clients. The cut-out here is fixed: unlike the AM-837-2, whose head pad lifts out to leave a flat top, this one is cut through the pad itself with a raised collar around it, so the opening is always there. Choose this one where the bed is used face-down most of the day, and the AM-837-2 where it has to work flat as well.

Customization and finishes

Cover colour, the base colour and the contrast piping between them are chosen per order against a colour reference, so the two tones can be reversed or brought closer together. The cut-out is cut into the pad, so its size and position are settled at build, and the collar is made in the same fabric as the top. The stool is finished to match. Send a colour reference and target dimensions; the reply confirms what is buildable and the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract. The bed ships as a top and a base: give us the door width, lift dimensions and stair turn. The range is listed in the massage bed collection, and our commercial massage bed buying guide sets out how the flat-top, cut-out and cabinet builds differ.