AM-848

AM-848 Massage Bed

AM-848 massage bed, 1900 x 660 mm, with powered height from 700 to 750 mm and a central drawer.

Dimensions1900 x 660 x 700-750 mm
Functions / FeaturesOne-piece cream leather-look top with a shallow waist at mid-length and no face cut-out; powered height adjustment between 700 and 750 mm; light timber frame with one large central drawer and a curved metal pull; open bays either side exposing a wired mechanism and cabling; four square legs with black levelling feet; 660 mm narrow body
Request a Quote

AM-848 is a 1900 x 660 mm massage bed with powered height adjustment between 700 and 750 mm, in cream leather-look on a light timber frame. The top is one pad with a shallow waist at mid-length and no face cut-out. A large central drawer with a curved metal pull fills the front, and the open bays either side expose a wired mechanism and cabling. Four square legs end in black levelling feet. The cabinet and lamp are staging.

Footprint and station planning

660 mm is 140 mm under the 800 mm bodies used by most full-length beds, so a pair takes 1320 mm plus a gap and a narrow room keeps a walkway. 1900 mm is 100 mm short of the 2000 mm covers are cut for, so check the linen. The bed is wired: mark the socket and cable route before the floor is laid. At 700 mm a therapist works from a high stool and at 750 mm standing; set the stool to the height you order. The drawer needs room to pull past the client’s arm.

Where this massage bed is used

For rooms that run one bed for sitting and standing work. The waist brings the therapist closer to the shoulders without leaning across a full-width pad, and with no face cut-out the top turns over without a plug or ring to reset; a prone treatment needs a separate face rest. The drawer takes towels and oil out of the walkway. Cream leather-look wipes down, though it shows oil sooner than a mid tone. Where the whole top lifts between 540 and 640 mm, the AM-832 is that bed; the AM-42 runs a 2000 x 900 mm electric build with a cabinet. The AM-8610A adds a two-drawer cabinet, and the AM-849-1 fixes the height at 650 or 680 mm.

Customization and finishes

Cover colour, timber tone and the waist profile are chosen per order. The waist is cut into the pad, so its depth and position are settled at build. Confirm the two working heights inside the 700-750 mm range and which side the socket lands on. The drawer split is fixed once the frame is cut. Send a colour reference; the reply confirms what is buildable and the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order in the contract. The bed travels as a pad on a separate frame: give us door width, lift dimensions and stair turn. Widths and heights are in the massage bed collection, and our buying guide sets out how flat-top, cut-out and cabinet builds differ.