AM-75-6

AM-75-6 Shampoo Bed

2000 x 880 mm shampoo bed at 630 mm in caramel and cream, with a built-in basin and matching stool.

Dimensions2000 x 880 x 630 mm
Functions / FeaturesBuilt-in black basin with a brass spout and a perforated pad above it; digital control panel on the front of the base; one continuous cream mattress; curved two-tone upholstered side panel; matching stool; 630 mm platform height
Request a Quote

AM-75-6 is a 2000 x 880 mm shampoo bed at 630 mm, in caramel leather-look fabric with a cream continuous mattress. A black basin with a brass spout sits at the head end; a digital panel is on the base and a stool sits beside it.

Footprint and station planning

The basin is built into the head end, so hot and cold supply and the drain land inside that footprint, not on the wall — settle the pipe runs before the floor is screeded, or the trap sits under the base. The panel needs a power point at the same end. The therapist works at the bowl, so the head end needs standing room; this bed cannot go hard against a wall there. At 2000 mm it is the standard length, 180 mm shorter than the AM-75-3 — the difference between two beds fitting along one wall and two that do not. At 630 mm a client sits on the edge and swings up.

Where this shampoo bed is used

For rooms that sell wash, scalp work and a flat rest as one appointment: the top is one continuous pad with no break under the shoulders, so a client lies flat and the therapist has the full length to work along. The cream pad against the caramel base is a practical split — the surface a client lies on wipes down after water and product, while the darker base takes the shoes and trolley wheels. The curved side panel breaks up what would otherwise be one long box when the bed is seen from the doorway. The matching stool gives the therapist somewhere to sit at the head end. Where the same 880 mm platform should carry no basin and a hand rest for prone work instead, the AM-75-2 is the massage version. Where the same 2000 mm length is built at 800 mm wide with an outboard white basin and a 680 mm platform, the AM-805 is that shampoo bed.

Customization and finishes

Cover, mattress and side panel colours are chosen per order against a colour reference; basin and brass spout stay as shown. The curved seam is cut with the cover, so a colour change moves the whole line. The basin is fixed at the head end, so the side the water enters from is settled at order. Send a colour reference and the target dimensions and the reply confirms what is buildable plus the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract. Bed and stool pack as two pieces: give us the door width, the lift dimensions and the stair turn, and tell us the water pressure and voltage. The range is listed in the shampoo bed collection, and wet-area clearance is covered in our note on station spacing.