AM-31D-9 Massage Bed

AM-31D-9 is a massage bed with the storage built into the base: 2000 × 1000 mm, top at 620 mm, on a black timber frame. One long side is a two-door cabinet with brass ring pulls, the other is an open shelf, and the upholstered top carries a face cut-out with two loose blocks that drop in to fill it.

Footprint and station planning

At 1000 mm wide it sits between the 800 mm single beds and the 1200 mm platforms: wide enough that a client can turn without feeling the edge, narrow enough to leave a working aisle. At 620 mm the top is at the tall end of the range, so check the stool against the bed rather than against the room. The cabinet opens along one side and that side needs clear floor to stand in; the open shelf at the other end is reached from the working position. Because the base is a solid volume, nothing slides underneath and everything stored has a home.

Where this massage bed is used

Specified for treatment rooms with a dark fit-out — black joinery, stone or dark timber floors — where a pale or cherry base would sit wrong against the room. The two blocks are the detail that earns its place: they drop into the cut-out when a client turns onto their back, so the surface stays flat for bodywork instead of leaving a hole under the shoulders. Where the same cabinet should come in a warm timber tone, the AM-31 massage bed runs it in cherry. Where the top should lift on a motor instead of staying fixed, the AM-31D massage bed is the powered build at 1100 mm wide. Where the same cabinet should come in natural oak and a 1200 mm width, the AM-31D-1200 is that build. Where the room is 150 mm narrower, the AM-31D-850 runs the same black cabinet at 850 mm and a 600 mm top.

Customization and finishes

The finish on the timber and the upholstery colour are chosen per order against a colour reference, and the two are specified together because the contrast carries the design. The cabinet doors, the shelf depth and the cut-out position are fixed once the frame is cut, so length and width are agreed before production rather than adjusted afterwards. Send a colour reference with the target dimensions and the reply confirms what is buildable plus the MOQ for that specification.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract, not published as fixed terms. The cabinet makes this bed heavier and bulkier than an open-frame table, so tell us the destination port and whether the room is upstairs or served by a lift, and the quotation covers packing to suit. The rest of the range is listed with dimensions in the spa massage bed collection, and how the builds differ is set out in our massage bed buying guide.