MZ-051D Dual Motor Pedicure Sofa

The dual-motor build separates the backrest and leg rest into two independent movements, so the seat can be set to a lounging angle while the leg rest stays low for the foot bath. Single-motor sofas move both together, which forces a compromise; the twin drive removes it. This is the version to specify where technicians work the feet for long stretches.

Footprint and station planning

The body is 2000 × 950 mm, the same footprint as the single-motor build, so choosing the twin drive does not cost floor space. Length is what decides station count here, and the clearance behind the sofa is set by the recline travel rather than by the motors. The two versions can be compared at identical footprint in the MZ-051D pedicure sofa.

Where this pedicure sofa is used

Specified for spa and pedicure venues where the seat switches between a seated foot bath and a reclined treatment without being reset in between. Station spacing follows the floor plan and the treatment schedule, so the count per room is set by layout rather than by the sofa itself. Double-treatment rooms that want the reclining mechanism inside one continuous body are served by the integrated MZ-051D sofa, which runs the leg rest through to the foot end.

Customization and finishes

Size, finish and function set are specified per order, and the logo goes on at the same point in production. Send the target dimensions and a colour reference; the reply confirms feasibility and MOQ. The same twin drive is built on a second platform as the dual-motor MZ-052, which adds the second motor to the MZ-052 body.

Ordering, MOQ and lead time

Include the destination port, expected volume and required voltage with the enquiry, and note any fixed control position the room needs. MOQ, lead time, packing and warranty terms are agreed per order and written into the contract. Single-motor and sliding versions of this platform are listed in the commercial pedicure sofa range.