AM-830 Pedicure Sofa

AM-830 is a 2000 x 1200 mm pedicure sofa at a 500 mm seat, upholstered in beige velvet on a dark wood-grain plinth. The backrest is raised between two thick side wings, with a quilted cushion and a loose bolster against it. A square basin is recessed into the seat at the foot end, a round control panel sits in the upholstered side, and an oval brass ring is set into the front panel of the plinth.

Footprint and station planning

1200 mm is the widest body in the pedicure range: two side by side take 2400 mm before any gap, and the plinth runs the full width, so measure the walkway to the wood, not to the seat. 500 mm is the seat height, not the backrest top, so a client sits down and swings the legs into the basin rather than climbing up. The basin sits at the foot end, so the drainage and supply land inside that footprint: settle the pipe route before the floor is screeded, and put a power point where the panel is. The plinth reaches the floor, so nothing stores under it.

Where this pedicure sofa is used

For a room that runs the soak as part of the treatment. The basin is cut into the seat, so a client stays on the sofa from the soak through to the back work, and the raised backrest with its two wings gives them somewhere to lean. Beige velvet against dark wood is the warm end of the range, but velvet holds a mark longer than leather-look. Where the same basin build is wanted narrower and taller, the AM-802-2 runs 1100 mm at 580 mm; the AM-62 keeps 1200 mm without a basin, and the AM-59-6 is the same width with no wood plinth. Where the basin has to fit a narrow room, the AM-839 sets it into a black frame at 1900 x 750 mm. Where the room is furnished in light timber rather than a dark plinth, the AM-840-1 sets the basin into a timber frame at 1900 x 850 mm.

Customization and finishes

Cover colour, the wood tone of the plinth and the finish of the brass ring are chosen per order against a colour reference. The basin is built into the seat, so its size and depth are settled at build, and the tap position at the same time — tell us which side the client enters from. Send a colour reference and target dimensions; the reply confirms what is buildable and the MOQ.

Ordering, MOQ and lead time

MOQ, packing, lead time and warranty are settled per order and written into the contract. The sofa ships as one piece: give us the door width, the lift dimensions and the stair turn, and send the drainage and supply positions on a plan. The range is listed in the pedicure sofa collection, and our pedicure chair buying guide sets out how the platform, cabinet and basin builds differ.